Degrees Celsius to Fahrenheit – Metric Conversion ºC to ºF

degrees celsius symbol

The degree Celsius (symbol: ° C) designates the temperature unit, named after the Swedish astronomer Anders Celsius (1701–1744), who was the first to propose it in 1742. The Celsius temperature scale was designed that the freezing point (freezing) of the water corresponds to zero, and the evaporation point corresponds to the value 100, observed at a standard atmospheric pressure.

degrees celsius

As there are 100 graduations between these two reference points, the original term for this system was either centigrade (100 parts) or hundredths. In 1948, the name of the system was officially changed to Celsius during the 9th General Conference on Weights and Measures (CR 64), both in recognition of Celsius and to eliminate the confusion caused by the conflict in the use of the SI centi prefixes. Therefore, it is not convenient to say “degree centigrade”, but rather, “degree Celsius”.


While the water freeze and evaporation values ​​are approximately correct, the original definition is not appropriate as a formal standard: it depends on the definition of standard atmospheric pressure, which in turn depends on the temperature definition itself. The current official definition of degree Celsius defines 0.01 ° C as the triple point of water, and 1 degree Celsius as being 1 / 273.16 of the temperature difference between the triple point of water and absolute zero. This definition guarantees that 1 degree Celsius has the same temperature variation as 1 kelvin.

Digital thermo hygrometer with a thermocouple inside Anders Celsius initially proposed that the freezing point be 100 degrees Celsius, and the evaporation point 0 degrees Celsius. This was reversed in 1747, at the instigation of Linnaeus, or perhaps Daniel Ekström, the builder of most of the thermometers used by Celsius.

The Fahrenheit scale

Due to the low temperatures in northern European countries, Gabriel Fahrenheit had developed a previous scale to be able to measure the extremely low temperatures in these regions.

Conversiondegrees celsius


The conversion method for Fahrenheit consists of multiplying the value in Celsius by 1.8 and adding 32 to the result.

Similarly, to convert degree Fahrenheit to degree Celsius, subtract 32 and divide the result by 1.8.


The Celsius scale is used almost all over the world on a daily basis, although it was called centigrade until the late 1980s and early 1990s, mainly in weather forecasts on European radio and television networks such as the BBC, ITV, and RTÉ .

In the USA, Fahrenheit is the preferred scale for daily temperature measurements. It should be noted, however, that even these countries use Celsius or Kelvin in scientific applications.

Street thermometer. In newscasts and thermometers on major avenues in Brazil, they always refer to temperature on the Celsius scale, expressing it only with the degree symbol (°). Such a notation causes some confusion for North American visitors and is considered wrong by the SI (International System of Units), since the degree symbol after the numerical quantity without the letter C represents the angle symbol.

Scientific thermometers have mercury inside, and homemade ones usually contain alcohol (blue in color). The most modern and also precise are made by the union of two different metals, creating a thermocouple. Most modern thermometers and thermostats use a thermocouple.

Representation of the unit “degree Celsius”

Resolution Conmetro nº 12, of 10/12/1988, adopts the General Framework of Measurement Units and instructs INMETRO to propose the modifications that become necessary to this Framework, in order to resolve omitted cases, keep it updated and resolve doubts that may arise in the interpretation and application of legal units.

– Sub-item 3.5 of Annex A of this Resolution Conmetro deals with the spacing between number and symbol, and establishes that the spacing between number and symbol of the corresponding unit must meet the convenience of each case, for example:

a) In sentences of current texts, the space corresponding to one or half letter is normally given, but spacing should not be given when there is a possibility of fraud;

b) In table columns, it is possible to use different spacing between numbers and the symbols of the corresponding units.

– Conmetro Resolution 12/1988 is based on the parameters recommended by the International Bureau of Weights and Measures (BIPM), which regularly publishes a publication on the units of the International System of Units – SI.

– Subitem 5.3.3 of the 8th edition (2006) of the BIPM publication establishes conditions for writing the value of a quantity in the following terms:

a) The unit symbol must always be placed after the numerical value of the expression for a quantity, leaving a space between the numeric value and the unit symbol.

b) The only exceptions to the rule are the unit symbols for the degree, minute and second of the plane angle, °; ´; and ”, respectively, for which there is no space between the numeric value and the unit symbol.

c) It should be noted that, according to this rule, the symbol “° C” for the degree Celsius must be preceded by a space when expressing a temperature on the Celsius scale, as shown below:

Representation of the “Celsius grade” unit on computers

In Unicode, the degree symbol is U + 00B0 (°), while the respective HTML code is °and the Alt + code is Alt + 0167.

Due to the similar appearance of this symbol with other symbols on the computer screen or in certain prints, such as the male ordinal indicator (º), there may be problems when searching for texts with these symbols. Therefore, for keyboards that do not differ between the degree and ordinal symbols, use:

degree Celsius: ALT + 0167 followed by the letter C.
male ordinal indicator: ALT + 167.

Temperature conversion table in degrees Celsius and Fahrenheit

Conversion Factors

Celsius into / for Fahrenheit: ( the C x 9) / 5) + 32

Fahrenheit into / for Celsius: ( the F – 32) x 5) / 9

c ºF
1 33.8
2 35.6
3 37.4
4 39.2
5 41.0
6 42.8
7 44.6
8 46.4
9 48.2
10 50.0
11 51.8
12 53.6
13 55.4
14 57.2
15 59.0
16 60.8
17 62.6
18 64.4
19 66.2
20 68.0
21 69.8
22 71.6
23 73.4
24 75.2
25 77.0
26 78.8
27 80.6
28 82.4
29 84.2
30 86.0
31 87.8
32 89.6
33 91.4
34 93.2
35 95.0
36 96.8
37 98.6
38 100.4
39 102.2
40 104.0
41 105.8
42 107.6
43 119.4
44 111.2
45 113.0
46 114.8
47 116.6
48 118.4
49 120.2
50 122.0
51 123.8
52 125.6
53 127.4
54 129.2
55 131.0
56 132.8
57 134.6
58 136.4
59 138.2
60 140.0
61 141.8
62 143.6
63 145.4
64 147.2
65 149.0
66 150.8
67 152.6
68 154.4
69 156.2
70 158.0
71 159.8
72 161.6
73 163.4
74 165.2
75 167.0
76 168.8
77 170.6
78 172.4
79 174.2
80 176.0
81 177.8
82 179.6
83 181.4
84 183.2
85 185.0
86 186.8
87 188.6
88 190.4
89 192.2
90 194.0
91 195.8
92 197.6
93 199.4
94 201.2
95 203.0
96 204.8
97 206.6
98 208.4
99 210.2
100 212.0

Degree Symbol: How to Put a Degree Icon on a Keyboard

Degree Symbol: How to Put a Degree Icon on a Keyboard: Sometimes when working with a text document in MS Word, it is necessary to add a character that is not on the keyboard. Not all users of this great program are aware of the large number of special characters and characters it contains. We’ve already written about adding some characters to a text document, and in this article we’ll talk about how to put degrees Celsius in Word.

degree symbol on keyboard

As you probably know, degrees Celsius show a small circle at the top of the line and a large Latin letter C. You can place a Latin letter in English by holding down the “Shift” key. But you need to take a few simple steps to make the necessary circle.

Tip: To change the language, use the keyboard shortcut “Ctrl + Shift” or “Alt + Shift” (the key combination depends on your system settings).

1. Click where you want to put the “degree” symbol in the document (after the last number after the space, just before the letter “C” ).

2. Open the “Enter” tab where in the “Symbols” group press the “Symbol” button .

3. In the window that appears, find and click on the “degree” symbol.

Tip: If the list is displayed after clicking the “Symbol” button , there is no “Degree” character , select “Other symbols” and find it in the “Phonetic characters” set and press the “Paste” button .

4. A degree is added to the location you specified.

Despite the fact that this special character in Microsoft Word is a degree sign, it seems unpleasant to say the least, and it’s not as high for the line as we’d like. To fix this, follow these steps:

1. Highlight the added degree mark.

2. On the “Home” tab , in the “Font  group , click the “Superscript” button ( X2 ).

Tip: You can also enable the writing mode “Superscript” by pressing ” Ctrl + Shift + (plus)” at the same time.

3. The special character is raised, now your Celsius numbers will be correct.

Add a degree using the keys

Each special character in a Microsoft suite has its own code, knowing that you can take action much faster.

To enter a degree icon using the Word keys, follow these steps:

1. Place the cursor where the degree mark should appear.

2. Enter “1D52” without quotation marks (letter D – English capitalization ).

3. Press “Alt + X” without moving the cursor from that point .

4. Highlight the added Celsius sign and press the “Superscript” button in the “Font” group .

5. The special sign “degree” gets the right shape.

That’s all, now you know how to spell degrees Celsius correctly in Word, or rather add a special character to denote them. We wish you success in acquiring the many features and useful functions of the most popular text editor.

There is no typographic symbol for the dimensions of quantities measured in degrees on the computer keyboard, which raises a logical question among users: how to put it? Most people find a way out by copying the superscript around from another source and then pasting it into their document. However, there are several easy ways to create a degree symbol with your own hands.

Print a degree symbol

degrees symbols


Each operating system provides certain key combinations (called keyboard shortcuts ) to perform an action quickly . For example, by pressing Ctrl + A at the same time in Windows, you can select the entire text document, you can use Ctrl + C to copy the selected snippet, and Ctrl + V to paste. ° The icon can also be entered using keyboard shortcuts. In Windows, this is done as follows:

  1. Open a document in Microsoft Word, Notebook, or any other program that allows you to enter text (even your browser’s address bar does).
  2. Turn on the numeric keypad on the right by pressing the NumLock key.
  3. Hold left Alt and enter 0176 or 248 on the numeric keypad. When you release the Alt key, a degree symbol appears above the cursor. If the code doesn’t work, try pressing Alt instead of Left.

In Microsoft Office programs (except Microsoft Excel), you can use another method:

  1. Hold down Ctrl + Shift + 2.
  2. Press Spacebar … When done correctly, a superscript circle will be added to the edited document.

In addition, Microsoft Word can work with hexadecimal Unicode tables by converting them to the corresponding characters. The degree icon corresponds to the code 00B0 – it should be written in the text where there should be a superscript circle, and then press Alt + X. Word removes the hexadecimal code from the text, replacing it with °.

Mac OS-is

To print the degree icon for Mac OS , use the Opt + Shift + 8 key combination. You can also use the following method:

  1. Open the menu and go to system settings. This action activates the symbol viewer.
  2. Enter the settings by clicking the button with the corresponding name. In the settings, select the “Show keyboard viewers, emoticons, and symbols” checkbox.
  3. In the upper right corner , a button titled “View” will appear. Click on it and select “Show emoticons and symbols”.
  4. Go to the “Punctuation” menu and double-click the degree icon. It is displayed at the cursor position.

If the degree sign is used quite often, it makes sense to add it to the list of favorite symbols. When you do this, an icon will appear at the top of the window among the quick access items.

Degree icon on mobile devices

Phones and tablets are ° easier to type than computers because they have a symbolic keyboard that displays icons.

The checked android degree symbol for widgets is written as follows:

  1. Open any application that allows you to use the on-screen keyboard.
  2. Click the character key on your keyboard (usually in the lower-left corner).
  3. Typically , the ° symbol is located on the second page of the symbol keyboard. The method for switching to this depends on the keyboard itself, but the toggle button is usually indicated by the “\ u003e” or “? 123” icons.
  4. Press the key with the superscript circle. To put a degree on the iPhone and iPad , you need to do the following.
    1. Open an application that allows you to use the keyboard.
    2. Go to the symbol keyboard by pressing the corresponding button.
    3. Hold 0 – A menu with a degree sign appears in front of you.
    4. Swipe and remove your finger from the screen. After that, a superscript circle is placed in the text.

Other ways to print a degree

In Windows, you can add a degree icon to an edited document using a symbol table. Hold down the Win + R combination on your keyboard and enter char map in the window that opens, then press Enter. A table of symbols opens in front of you. Find the degree mark in it, double-click it, and click “Copy.” Go back to the document you’re working on and paste the icon where you want it in the text, using the keyboard shortcut Ctrl + V.

You can also open the symbol table with the Start button. Click Start and type “Character Map” in the search bar. The program appears in the search results.

If you want to place the ° symbol in the text of your website, place the ° or ° symbols in the hypertext document – both the first and second form the required character.

Degrees Celsius using tape

It is important to point the cursor where the degree icon is needed. Then go to the “Add” tab, click the “Symbol” button and go to the “Other Symbols” section. A window will open with different variations of icons and letters.

Now it is important to set “Font” and “Set”. On the “Font” tab, select “Times New Roman” and on the “Set” tab, find “Additional Latin-1.” If configured correctly, a new name layout with a degree icon will appear in the window. Select the temperature symbol and click the “Add” button. Everything succeeded!

How to write t with a combination of degree buttons?

Anyone can manipulate the keys like this, you just have to remember the character code. We enter the text and stop at the place where it is necessary to mark t with a degree sign. Next, find and hold the Alt key on your keyboard, and now the main thing is to remember the symbol code and enter it. Recall when someone forgot – 0176.

Note. You must enter the numbers on the additional numeric keypad shown in the screenshot below.

The image below shows how to find the “Celsius” symbol code to print a temperature sign easily and quickly in the future. First, place the cursor in the right place, enter the icon code, and hold down Alt + x (x for the English keyboard layout), and you’re done.

And when you first use the icon, it appears in a pop-up window for quick finding and entering.

Can a degree be written with a letter or a number?

The “Home” section of Word’s main layout has a superscript icon that you can use to insert a temperature sign above the text reference line. Let’s look at the picture and repeat. Place the cursor in the correct place, open the “Home” tab, scroll to “Superscript” and press (lights up yellow) and then type either the letter “o” or the number “0”. Who likes it more!

It is not uncommon for you to use a non-standard character or a character that is not on the keyboard when working with text documents. For example, the degree sign is used very often, but it is not on the keyboard. In this article, we’ll talk about how to place a degree mark on the keyboard, but also without it.

Method number 1. The key combination Alt + 248.

If you need to enter a degree using the keyboard, perhaps the fastest and easiest way is the Alt + 248 key combination. To use this key combination, place the cursor over the text where the degree sign should be. After that, hold down the Alt key on your keyboard and, without releasing the Alt key, enter the number 248 in the auxiliary key block (on the right side of the keyboard, under Num Lock).

As a result, a degree mark appears at the cursor position. This key combination works in any program.

Method number 2. The key combination Alt + 0176.

There is also a keyboard shortcut Alt + 0176. It works the same as the previous method. You must place the cursor where you want to place the degree mark, hold down the Alt key, and type 0176 on the additional keyboard without releasing it.

After that, a degree mark appears at the selected location. This key combination, like the previous one, works in every program.

How to Put a Degree Without a Keyboard |

If you do not remember the key combinations described above, entering a degree without using the keyboard may be more convenient. This can be done using the “Symbol Map” program, which is available in any version of Windows.

To do this, you must first open the “Symbol Table” program. For example, you can press Windows-R and execute the command “charmap.exe” in the window that appears.

You can also open the symbol table from the Start menu.
In the “Symbol table” you need to find the degree, select it with the mouse and click “Select”.
After that, you need to click the “Copy” button and paste the degree mark where you want it in the document, using the CTRL-V key combination or the “Paste” command.

So you can put a degree in any document and any program.

(:) comma (,) dash ( -, -, -, – ) ellipse (…, …,…) exclamation mark (!) dot (.) hyphen ( – ) hyphen minus (-) question mark (?) quote ( „“, «», “”, ”, ‹› ) semicolon (;) Separators space () () ()On Windows computers, you can enter a degree by pressing Alt and typing on the numeric keypad 0 1 7 6. On Linux computers, you can enter a degree by typing Compose oo or ⇧ Shift + Ctrl + U and typing 0 1 7 6 after u … On Mac computers, you can enter a degree by pressing alt + 0.

According to the rules of the typographic set, the degree mark is placed immediately after the numerical representation of the angle or temperature dimension without a space, but if the scale is indicated for temperature (Celsius, Fahrenheit, etc.), the degree mark is beaten with a non-breaking space degree mark. P:

The temperature in the first chamber of the chamber should be kept at +26 ° C and in the second 2 ° cooler.

At the time shown, the missile was above South America, at 7 ° 33 ′ S, incl. and 40 ° W. etc.

Unicode supports Kelvin characters (212A) and combined Celsius characters (2103) and Fahrenheit characters (2109) that are outside of Chinese fonts (full-width format) to ensure compatibility with Chinese CJK encodings where such characters occur. Is not being used.

It should be noted that the unit of temperature on the Kelvin scale is not called ” degree Kelvin “, but simply ” kelvin “.

An excerpt that characterizes the degree sign

They then describe to us the size of the souls of the marshals, especially Ney, the size of the soul, which is that at night he made his way through the forest across the Dnieper and ran to Orsha without flags and cannons and without nine-tenths of his army.

degree symbols
And finally, historians present to us the great departure of the great emperor from the heroic army as something great and glorious. Even this last act of flight, in human language, called the last degree of humility that every child learns to be ashamed of, and what is said in the language of historians is justified.
When such elastic threads of historical reasoning can no longer be stretched, when action is already clearly at odds with what all mankind calls good and even justice, historians have a welcome concept of size. Greatness seems to rule out the possibility of good and bad measurement. There is no harm in the big ones. There is no terror that can be blamed on the big ones.
– “C” is grand! “[It’s majestic!] – historians say, and then there is no good or bad, but there are ‘big’ and ‘not big’. Grand is good, not big is bad. Grand is by these characteristics a property, some special animals, whom they call heroes. ”And Napoleon, coming home with a warm coat not only by the dying comrades, but (in his opinion) by the people he brought here, feels que c”
“Du sublime (he sees something sublime) honor to ridicule il n ‘ya qu’ un pas,” he says. And the whole world has been repeating for fifty years: “Exalted! Great! Napoleon is grand! Du sublime honor ridicule il n “ya qu” un pas “. [Majestic … Only one step from majestic to ridiculous … Majestic! Excellent! Napoleon great! Only a step from majestic to ridiculous.]
And no one should ever remember that kindness and recognizing immeasurable greatness by bad dimensions is only recognizing one’s insignificance and immeasurable smallness. For
us, the standard of good and evil given by Christ is immeasurable, and there is no magnitude without simplicity, goodness, and truth.

Who among the Russian people, reading the descriptions of the last period of the 1812 campaign, did not experience strong resentment, dissatisfaction and uncertainty. Who did not ask themselves: how did they not take, did not destroy all the French, when all three armies surrounded them more than when the irritated, hungry and frozen French surrendered as squads, and when (as history says) the Russians aimed to stop, interrupt and capture everything the French.

Celsius degree symbol – Degrees centigrade icon on the keyboard

Degree Symbol

When writing scientific or highly specialized texts, special values ​​are needed, as well as other non-standard signs. It can be scientific articles, courses or other data where you need to know how to put a mark in Word or a similar symbol.

How to insert special characters in Word – in our new article

Many beginners, when trying to establish non-standard designations, are looking for them on the Internet to copy. This method is quite time consuming, as you must perform a similar procedure for each character. Also, not everyone knows the brand name like diameter.

Degree Symbol

Easier Method

There are several common methods that are suitable for a comprehensive solution for all designations, and each one individually. To work with special characters, the Windows operating system provides a special table that allows you to place these indicators directly in the document. In this way, you can insert a paragraph, diameter, degrees, tick and others.

It’s on the “Insert” toolbar. You need to click on the “Symbols” icon and then select the additional “Other” menu. Before the user opens a window with a large set of all possible values. They can be selected and inserted at the established position in the document. For your convenience, there are selection criteria, such as “Mathematics”, “Latin” and “Logic”, to facilitate the search for the required brand.

Use the “Insert” panel and find the “Character” command there.

The arrow can be entered in the same way. It comes in various versions in the stock panel. If a non-standard or elongated view is required, the “Insert” parameter provides a “Shapes” window, from where the arrow can be taken to work in any length and various graphic versions.

Hot keys

This method is best suited for those who should have regular access to symbols, such as diameter or paragraph. It does not require the installation of additional programs, you only need to press a combination of keys. You must first hold down the Alt button on the keyboard and then dial a number combination on the primary or secondary keyboard.

To set the diameter, you need to enter the numbers 0216. When the user presses Alt, the entered data will change to the desired value. This sign is useful when creating drawings, documents for layout, as well as promotional products. The diameter is in the shape of a crossed out letter “o”.

The paragraph is made in the form of two letters “s”. Previously, it was a required attribute on typewriters, but today the paragraph is used in automatic mode or with special insertion. Using a similar method with the Alt button pressed, you should enter 0167. The combination will become a paragraph. In the same way, you can insert degrees Celsius, which is placed in the combination 0186 or 0176.

Other forms

Degree can also be put into hexadecimal code. To do this, instead of the required character, you must dial 00BA. This special designation changes to a sign after pressing the Alt + X combination. There is a “superscript” icon on the main page. After pressing the cursor, it will move to the upper position of the entered value. Just press the letter “o” or the number “0” to accept the value of the degree.

In this way, special characters such as diameter, paragraph, and others are inserted when writing text files. The choice of method depends on personal preference and convenience. Over time, this happens automatically, so it only takes a little practice with either method.

– Percentage of percent sign Punctuation apostropher

– sign Division sign Punctuation apostrophe (‘)

– × multiplication sign (×) the mathematical sign of the multiplication operation. The multiplication sign is represented as a cross (×), period

– √ The sign of the root (the sign of the radical) in mathematics, the symbol of the roots, the default square. In the general case (for roots of degree n), the exponent is placed on the “bird”: the sign is used for cube roots, for roots of fourth degree …

– %% sign, more often indicating percentages. The origin of the designation

This term has other meanings, see Plus minus (meanings). ± ∓ The plus minus sign (±) is a mathematical symbol that is placed in front of a certain expression and means that the value of this expression can be both positive

Not to be confused with ʃ. ∫ The integral sign is used to denote an integral in mathematics. It was first used by the German mathematician and founder of the differential and integral calculus Leibniz in the late 17th century. Symbol (∫)

Tilde (Spanish tilde, from lat. Inscription Titulus) is the name of several typographic marks in the form of a wavy line. Contents 1 Diacritical mark 1.1 Superscript

– ¯ Macron (from Greek. Μακρόν) accent mark, represented as a bar above the symbol. In Unicode, a macron in the form of combined diacritics has the code U + 0304, and in the form of an independent character U + 00AF Use as a diacritic

The books

  • The treasure of the signs of the zodiac, or the veil of Isis, Omelchenko Yu. The book is written in the style of the “hero’s journey”, with a constant emphasis on esoteric values, easily defined by Astrology and esoteric Kabbalah, and ideally serves as a universal goal …

It is not uncommon when working with text documents, it is necessary to put some type of non-standard character or that is not on the keyboard. For example, the degree sign is used very often, but it is not on the keyboard. In this article, we will talk about how to place a degree sign with and without using the keyboard.

Method number 1. Alt + 248 key combination.

If you need to put a degree sign with the keyboard, perhaps the fastest and easiest way is to use the key combination Alt + 248. To use this key combination, place the cursor at the place in the text where there should be a degree sign . After that, hold down the Alt key on the keyboard and without releasing the Alt key, type the number 248 in the additional key block (on the right side of the keyboard, under Num Lock).

As a result, where the cursor was placed, a degree sign will appear. This key combination works in any program.

Method number 2. Alt + 0176 key combination.

There is also an Alt + 0176 key combination. It works the same way as in the previous method. You need to put the cursor where you need to put a degree sign, hold down the Alt key and don’t release, type 0176 on the additional keyboard.

celsius degree


After that, a degree sign will appear at the selected location. This key combination, like the previous one, works in any program.

How to put a degree sign without keyboard

If you cannot remember the key combinations described above, it may be more convenient for you to insert the degree sign without using the keyboard. This can be done with the help of the “Symbol Table” program, which is available in any version of Windows.

To do this, you first need to open the “Symbol Table” program. For example, you can click Windows-R and in the window that appears run the command “charmap.exe”.

In the “Character table” you need to find the degree sign, select it with the mouse and click the “Select” button.

After that, you need to click the “Copy” button and paste the degree sign in the correct place in the document using the CTRL-V key combination or the Paste command.

Therefore, you can put a degree sign in any document and any program.

The degree symbol will be extremely necessary when entering measurements, such as temperature values. Alt + 0176 key combination or drop down menu will help to set degree in Word.

Celsius degrees using the ribbon menu

It is important to indicate with the cursor where the degree icon is needed. Then go to the “Insert” tab, click on “Symbol” and go to “Other symbols”. A window will open with different variations of icons and letters.

Now it is important to specify the “Source” and the “Set”. On the “Font” tab, select “Times New Roman”, and on the “Set” tab, find “Additional Latin 1”. When properly configured, a new symbol design will appear in the window, including the degree icon. Select the temperature symbol and click the “Insert” button. Everything worked out!

How to write t with button degree combination?

To perform such manipulation with the keys under everyone’s power, you just need to remember the signal code. We write the text and stop at the place where it is necessary to indicate t with the degree sign. Next, we find the Alt button on the keyboard and press it, and now the main thing to remember is the character code and we type it. We remind you if someone forgot – 0176.

degree symbol

Note: you must dial the numbers on the additional numeric keypad shown in the following screenshot.

The image below shows how to find the character code “Celsius” to easily and quickly print the temperature signal in the future. First, put your cursor in the right place, type in the code for the icon, and hold down the Alt + x key combination (x – on the English keyboard layout) and you’re done.

And also when you use the icon for the first time, then it appears in the popup window to find and insert it quickly.

Is it possible to write a degree in letters or numbers?

The main Word layout in the “Home” section is a superscript icon, with which you can write a temperature sign above the reference line of all text. We look at the image and repeat it. Place the pointer in the right place, open the “Start” tab, find the “Superscript character” and press (light yellow), and then type the letter “O” or the number “0”. Who likes it more!

A typographic symbol in the form of a superscript circle, generally denoted as the dimension of angles and temperatures measured in degrees   , absent from the computer keyboard. However, it is in the encoding tables that the operating system uses to summarize the characters on the computer screen. He is among the first 128. marks   this table that allows him to use it even in the documents of the most primitive text formats, eg txt.


1.   Use code 0176 to insert the degree icon in text documents. To do this, press the alt key and, without releasing it, type this code on the numeric keypad (optional). As you enter the code, nothing will change on the screen, and when you finish and release the alt key, the ° icon will appear at the location indicated by the input cursor.

2.   Start the Windows Character Map component, as an alternative to the insertion method for this symbol described above. You can do this, for example, by pressing the win + r key combination, typing the charmap command, and clicking the Enter key. In the symbol table of the window that opens, find the degree icon, double-click it, and click the “Copy” button. After that, switch to the edited document window and paste the copied symbol (ctrl + v).

3.   Use the key combination opt + shift + 8 if the operating system you are using belongs to the Mac OS family. It is this hotkey combination that you are assigned to insert a grade icon into documents.

4.   Paste hexadecimal code 00B0 (B – English letter), if you are working with documents in a Microsoft Office Word word processor. This code corresponds to the degree designation in the Unicode table, and Word can work with such symbol designations. After placing the input cursor at the place in the text where the degree sign should be, type this code and then press the alt + x key combination and the word processor will remove all four characters from the text, placing a single ° symbol .

5.   Use html character primitives if the degree sign must be placed in a hypertext document. To display this sign in the text of a web page, it is allowed to place a sequence of ° or ° characters: they both form the same ° icon.

To type the ° symbol on the keyboard, you need to hold down the ALT key, and on the auxiliary keyboard, type 0176 and release the ALT key after that. To print other characters, such as © ®, etc. I need to know the key code. This is the keycode, now activate Num Lock and press ALT and then on the auxiliary keyboard, type 0163 and release ALT. It is finally allowed to invariably call up a character table and copy characters from there, but this is neither fun nor sporty.

Good advice
How to enter missing characters on the keyboard? Let’s assume a trivial situation: you need to enter a special character in some text, but there is no key on the keyboard with such a character. How to be If you are working in a Word text editor, then there are no drawbacks: choose the Insert menu – \ u003e Symbol Yes, thanks, I already stumbled … I really didn’t find out right away. While I am writing the text in Notepad, it is not very comfortable to go up there all the time, for my taste, let’s say, exposing the elements of the list, degrees, mathematical signs

ºC means degree Celsius and not degree centigrade?

degrees celsius symbol

By the middle of the 17th century, sensitive thermometers were available, but there was no serious attempt to establish a universal scale for the measurement of temperature since there was not even a clear scientific knowledge of what it itself was. In 1669, Father Honoré Fabryen Leyde calibrated his thermometers, first “putting them on ice” and then “in water heated to the maximum degree” (he did not go so far as to say boiling). Some years later the French physicist and naturalist René Antoine Ferchault de Réaumur adopted the ice and water boiling points, but assigning them as values ​​0 and 80.

degrees symbols

With the beginning of the 18th century, Daniel Gabriel Fahrenheit began his work, key to the development of thermometry, which was partially based on that of the
Danish astronomer Olaus Römer, who had built a thermometer based on two fixed points. It seems that a misinterpretation of Römer’s scale led him to construct his own (the point that Römer described as water at blood temperature, Fahrenheit understood literally when Römer probably only meant warm water). In any case, the great merit of Fahrenheit was that it was able to build stable thermometers and a reproducible scale. He was not the first to suggest creating a scale using fixed points, but he was the first to take advantage of the method using good thermometers.

It is in 1742 when Anders Celsius publishes an article in “Kungliga Swenska Wetenskaps Academiens Handlinga”, the annals of the Royal Swedish Academy of Sciences, entitled “Observations on two constant degrees in a thermometer”. This article was the origin of the Celsius temperature scale. In it, after making a summary of the different ways of expressing the temperature of the time, Celsius presented a list of his experiments to elaborate his temperature scale with two fixed points: that of snow or melting ice and that of boiling water. . Initially Celsius assigned 0º to the boiling point and 100º to the solidification point, but this assignment was soon reversed, probably by Daniel Ekström, who made most of the scientific instruments that Celsius used.

At the end of the 19th century, for the comparison of length standards, the International Committee of Weights and Measures adopted, as the normal thermometric scale for the International Bureau of Weights and Measures, the centigrade scale of the constant volume hydrogen thermometer, which had as fixed points the temperature of the melting ice point (0º C) and that of the boiling distilled water (100º C); In this way, the unit of temperature would be the “degree centigrade” and would correspond to one hundredth of the difference (at normal pressure) between the melting points of ice and the boiling points of water.

The degree centigrade continued to be used as a unit of temperature until in 1948 the Consultative Committee on Thermometry discussed the need to replace the point of ice, with a reproducibility of the order of one thousandth of a degree, by the triple point of water, better. defined and whose reproducibility was, at that time, of the order of one ten-thousandth of a degree. The possibility was also studied, indicated as early as 1854 by Lord Kelvin, of defining the thermodynamic temperature by means of a single fixed point, instead of defining it by the interval from 0ºC to 100ºC. Finally this “revolutionary” idea was approved, not without many discussions, and the triple point of water became the pillar of the temperature scale, which was assigned the value of 0.01º C (or 273.16 K).

The General Conference on Weights and Measures in October 1948 accepted the principle of the single fixed point, but decided to wait to assign it a numerical value. This same Conference decided to replace the name of “degree centigrade” by “degree Celsius” because of confusion. It was not until the 10th General Conference on Weights and Measures in 1954 that the 273.16 K value for the triple point of water was officially adopted.

This decision had a surprising result, since for a few years two different Kelvin lived together. One defined as the fraction 1 / 273.16 of the thermodynamic temperature of the triple point of water and the other the kelvin of the 1948 centigrade scale defined as the one hundredth part of the temperature interval between the boiling point of water and the point from the melting ice. They were fortunate to be very close to each other, but it was certainly a difficult situation for the metrologists of the time.

Later, very wisely, it was decided to modify the text of the 1948 International Temperature Scale and, in 1960, a corrected edition was published by the 11th General Conference on Weights and Measures. This corrected scale was called the Practical International Temperature Scale and defined the kelvin as the fraction 1 / 273.16 of the thermodynamic temperature of the triple point of water. In this way, the International Temperature Scale definitively ceased to be a centigrade scale, since adopting the triple point of water as the primary fixed point with the temperature of 0.01º C, the interval that separated it from the boiling point of water did not it was 100º C.

Currently, the current and internationally accepted temperature scale is the 1990 International Temperature Scale, which establishes that the basic unit of the physical magnitude of thermodynamic temperature (symbol T ) is the kelvin (symbol K ), and it continues to be defined as the fraction 1 / 273.16 of the thermodynamic temperature of the triple point of water. Furthermore, as the expression of a temperature by its difference at 273.15 K (melting point of ice) was considered common practice , the use of the Celsius temperature (symbol t ), defined by:

t / ° C = T / K – 273.15

The unit of Celsius temperature is the degree Celsius (symbol ° C), which is, by definition, equal in magnitude to the kelvin.

Degree Celsius

degree celcius

The degree Celsius (symbol in ° C) is the unit of a temperature measurement scale , named after the Swedish astronomer Anders Celsius (1701 – 1744), who first proposed it in 1742. The Celsius scale is a scale to indicate the temperature at which the temperature ranges are degrees Celsius.

The Celsius scale defines the melting point of ice in a mixture of water saturated with air at 0 ° C and the boiling point at 99.974 ° C under standard pressure conditions (1 bar, slightly less than the atmosphere, pressure to water) boils at 100 degrees Celsius).

Originally conceived by the Celsius scale, it had a boiling point of water at 0 ° C and a freezing point of 100 ° C. After his death, however, the scale was reversed in 1745 by Linnaeus, transforming it into what is now commonly used.

The current official definition of the Celsius scale places 0.01 ° C as a triple point of water and a degree as 1 / 273.16 of the temperature difference between the triple point of water and absolute zero. This definition of degrees Celsius ensures that the temperature difference of one degree Celsius represents the same temperature difference as a Kelvin.


Formulas for converting degrees Celsius to other temperature units.

  • Conversion of degrees Celsius to degrees Fahrenheit at ° F = (9/5 × ° C) + 32
  • Conversion of degrees Fahrenheit to degrees Celsius at ° C = (5/9) × (° F – 32)
  • Conversion of degrees Celsius to kelvin at K = ° C + 273.15
  • Conversion Kelvin to degrees Celsius ° K = – 273.15

Anders Celsius originally proposed that the water freezing point be 100 ° C and the boiling point 0 ° C. The ladder was reversed in 1745 at the suggestion of Linnaeus, or perhaps by Daniel Ekström, producer of most of the thermometers used by Celsius.

The Celsius and Fahrenheit thermometric scales cross at the same value of -40 degrees, that is, the value of -40 ° C corresponds to -40 ° F.

One way to convert Celsius to Fahrenheit is to multiply by 1.8 and add 32.

° F = ° C × 1,8 + 32

On the other hand, to convert Fahrenheit to degrees Celsius, subtract 32 and divide by 1.8.

° C = (° F – 32) / 1,8

The Celsius scale is used daily in most parts of the world, although in mass media it is still called centigrade until the 1990s, especially in weather forecasts. In the United States (as well as in non-corporate territories and freely associated states of the Pacific), in Belize, Liberia and some Caribbean islands, the Fahrenheit scale is used, but these countries also use the Celsius or Kelvin scale in Applications. scientific or technological.

Other temperature ranges are: Newton (around 1700), Rømer (1701), Fahrenheit (1724), Réaumur (1731), Delisle or de Lisle (1738), Rankine (1859), Kelvin (1862) and Leyden (by around 1894). Note that “kelvin” is tiny, because it is an SI unit, even though it is derived from the noble title of scientist William Thomson.


Since there are a hundred divisions between these two landmarks, the original term for this system was either centigrade or centesimal. In 1948, the ninth General Conference of Animals (CR 64) officially changed its name to Celsius to remove several ambiguities:

  • the centi prefix is ​​used by the SI system for submultiples;
  • a more correct name, at least since Linnaeus was invested, would have been “hectograd”;
  • the hectogram is also ambiguous and, in oenology, indicates the alcohol content per hectolitre of wine;
  • the term “degrees centigrade” was also used to indicate the hundredth degree used to measure angles;
  • Kelvin is also a degree centigrade, in that it is obtained, like Celsius, by dividing the interval between two fundamental fixed points in equal parts.

The decision of the Conférence générale des poids et mesures aimed to remove ambiguities and to unequivocally associate the creation of the scale with Celsius (despite Linnaeus’ important contribution); in addition, the scale was standardized with those of Kelvin (created by Lord Kelvin), Fahrenheit, Réaumur and Rankine , all named after their inventor.

Despite this, there are often people who refer to degrees centigrade as “degrees Celsius”, just as they use the centigrade concept scale.


The existence of an absolute temperature scale is a consequence of the second principle of thermodynamics .

According to the second law, the absolute temperature scale starts from the existence of 0º absolute. This condition is met only by two basic units:

  • Degree of Kelvin
  • Grau Rankine.

Zero degrees Kelvin corresponds to -273.16 degrees Celsius.Author: Oriol Planas – Industrial Technical Engineer, specializing in mechanics

What is the degree of Celsius symbol

1. The temperature measurement unit of the Celsius temperature scale (C), represented by the symbol ℃, is one of the most widely used temperature scales in the world. Celsius is now included in the International System of Units (SI).

2. Basic definition: Celsius temperature has been included in the International System of Units. In physics, the Celsius temperature scale is expressed as t, and the absolute temperature scale (unit: Kelvin) is expressed as T, and the conversion relationship is t=T-273.15. Celsius is a special name that replaces Kelvin when expressing Celsius temperature, and 1K=1°C in value.

3. Both Fahrenheit and Celsius are used to measure temperature. Celsius is used by most countries in the world, including our country; Fahrenheit is used by only five remaining countries in the world, including the Bahamas, Belize, the British Cayman Islands, Palau, the United States of America and other dependent territories (Puerto Rico, Guam, U.S. Virgin Islands).

How to type Celsius Symbol in word

Celsius is a temperature scale that is widely used in the world and is represented by the symbol “℃”. It was proposed by the Swedish astronomer Anders Celsius in the 18th century. Celsius = (Fahrenheit-32) ÷ 1.8. Its freezing point is 0°C, and the boiling point of water at 1 standard atmosphere is 100°C. The current Celsius temperature has been included in the International System of Units, and the definition of Celsius temperature is t=TT.

Celsius is a temperature scale that is widely used in the world and is represented by the symbol “℃”. However, in actual work, it is often necessary to insert the ℃ symbol in Word. I stumbled upon today that I don’t know how to enter the Celsius symbol ℃ in Word? How to do? Below, I will summarize some of the methods of entering the Celsius symbol ℃ in Word. I hope that after reading this article, I don’t have to worry about how to type ℃ in Word. There are several simple ways to insert the Celsius symbol ℃ in Word: Although some small symbols are usually not used by people at all, they still have to be mastered. Sometimes they might come in handy! Here are a variety of ways to enter the Celsius symbol

Input degrees Celsius:

  1. Select “special symbols”; 
  2. Then select “number/unit” from the special symbols that pop up, and then you can see the symbol “Celsius ℃” at the bottom left.   

Input method Celsius symbol input method: 

  1. Click the “wrench icon” on the far right of QQ input method, and then select “Symbol”;
  2. Select “Number/Unit” on the left side of the symbol input device that pops up, and you can find it on the right The desired “degree Celsius” too.   

Smart ABC input Celsius symbol, 

first press “V”, then press the “1” key, then press “Page Down” 7 times, then press the “7” key, the °C comes out   

How to type the Celsius symbol in Wubi 86 version 

℃ Right-click on the soft keyboard, select the unit symbol, press “9” to get ℃   

Tips: In Word, using Sogou input method and omnipotent five pen typing have different symbols, which can be solved by switching between Chinese and English. This is the difference between full-width and half-width. In the two input methods, if you enter full-width or half-width, they should be exactly the same  

2. Skills of inputting Celsius symbol in Word2003

  1. Open Word2003 and click “Special Symbol” in “Insert” in the menu bar; 
  2. You can find the “Celsius” symbol you want in “Unit Symbol”.

3. How to input the Celsius symbol in Word2007 

Click the “Insert” tab, select “More” in the “Special Symbols” option group, then “Unit Symbol”, select the Celsius symbol to confirm.

What are degrees Celsius Symbol (° C)?

degree celsius symbol

We explain what degrees Celsius are and who was the creator of this unit of measurement. Also, what are Kelvin and Fahrenheit degrees.

unit of measurement for temperature,  wrongly known as degrees Celsius, and represented by the symbol ° C, is called degrees Celsius . This unit pays tribute to its creator, the Swedish physicist and astronomer Anders Celsius, and is equivalent in caloric intensity to the Kelvin degree scale, so it can be defined with the following formula:

Temperature (° C) = Temperature (K) – 273.15

Paradoxically, William Thompson, creator of the Kelvin scale, created it based on the Celsius degree scale, since it is later. However, the latter is the one accepted by the International System, along with that of Celsius as an accessory unit.

For its part, the conversion from degrees Celsius to degrees Fahrenheit is done using the following formula:

Temperature (° F) = 1.8 x Temperature (° C) + 32

The Celsius degree scale places its zero point (0) about 0.01 degrees below the triple point of water: that in which the three states of matter, solid , liquid and gaseous , coexist in equilibrium .

Initially, its creator had based on the freezing and boiling points of water , assigning them 100 and 0 degrees respectively, so that the higher the temperature, the lower the temperature. This logic would be reversed around 1744 when Jean-Pierre Christin and Carlos Linneo proposed to reverse it.

2.Anders Celsius

The creator of the Celsius scale was Anders Celsius (1701-1744), a scientist of Swedish origin. Born in the Swedish Empire, he was professor of astronomy at the University of Uppsala , where he supervised the construction of his observatory, in charge of which he has been since 1740.

He was interested in observing the northern lights , in measuring the flattening of the planet at its poles, although his best-known scientific contribution is the creation of the temperature scale that bears his name, which he proposed to the Swedish Academy of Sciences. as a replacement for the Farenheit scale, of German origin.

He died in 1744, a victim of tuberculosis. However, in life he enjoyed numerous recognitions in the scientific area , such as his acceptance in the Royal Society, in the Leopoldina Academy of Natural Sciences or the Prussian Academy of Sciences. Subsequently, one of the craters of the Moon was named in his honor.

3.Kelvin degrees

Created by William Thompson Kelvin (called Lord Kelvin) in 1848, it was established using the Celsius scale, but relocating its zero point (0) to make it coincide with the so-called absolute zero (-273.15 ° C, minimum possible temperature) but keeping the same dimensions of the scale. This thermometric unit is represented by the letter K and is considered the “absolute temperature”, which is why it is used in the scientific field, especially in physics and chemistry .

Kelvin degrees are also used to measure color temperature in film , video, and photography . That is, a scale to measure color compared to what a black body heated at a certain temperature in degrees kelvin would emit.

4.Farenheit degrees

Represented with the symbol ° F, the degree Farenheit  was proposed by the German physicist and engineer Daniel Gabriel Farenheit in 1724 . According to its scale, the freezing and boiling points of water are 32 ° F and 212 ° F respectively, that is, unlike the Celsius scale, it does not use these points as defining limits.

Farenheit degrees

Instead, Farenheit determined its zero point on the scale through a usual cold mix: ice, water, and ammonium chloride. This is because he wanted to abolish the negative scales of the Rømer scale used until then.