DEGREE SYMBOL ON COMPASS

Degree Symbol on Compass

DEGREE SYMBOL IN GEOGRAPHIC COORDINATES

degree symbol in geographic coordinates

The geographical coordinates is a reference system that allows each location on the Earth is specified by a set of numbers, letters or symbols. The coordinates are generally chosen so that two of the references represent a horizontal position and a third represents the altitude. The horizontal position coordinates used are latitude and longitude, a spherical or spheroid angular coordinate system whose center is the center of the Earth and is usually expressed in sexagesimal degrees:

The latitude 1 ( abbreviation :. Lat, φ, or phi) of a point on the surface of the Earth is the angle between the equatorial plane and the line passing through this point and the center of the Earth. All points with the same latitude form a plane parallel to the plane of the equator. The equator is parallel 0 ° and divides the globe into northern and southern hemispheres; thus the north pole is 90 ° N and the south pole is 90 ° S.

The longitude 2 (abbreviation: Long., Λ, or lambda) of a point on the Earth’s surface is the angle between the reference meridian and the meridian that passes through this point. The most widely accepted reference meridian is the meridian that passes through the Royal Observatory at Greenwich, located southeast of London , England . This prime meridian determines the eastern and western hemispheres.

The lines of longitude form maximum semicircles that pass through the poles and are called meridians. The meridians along with their corresponding antimeridiansthey form circumferences of 40,007,161 km in length. The distance in km to which one degree of longitude equals depends on the latitude.

As the latitude increases, towards North or South, the kilometers per degree decrease. For the parallel of the Equator, knowing that the circumference that corresponds to the Equator measures 40,075,017 km, 1 ° is equivalent to 111,319 km (the result of dividing the perimeter of the equator by 360 ° of longitude). 3

Indication of altitude requires the choice of a spheroid model that represents the Earth, and these models produce different values for altitude. This is solved using a data that represents the altitude in the different models used.

The terrestrial insolation depends on the latitude. Given the distance that separates us from the Sun, the light rays that reach us are practically parallel. The inclination with which these rays strike the Earth’s surface is thus variable according to latitude.

In the intertropical zone, at noon, they fall almost vertically, while they fall even more steeply the further one ascends in latitude, that is, the closer we get to the Poles . This explains the contrast between the polar regions, which are very cold, and the tropical regions, which are very warm. 4
Absolute position: it is determined through the geographical coordinates (latitude and longitude).

Relative position: it allows locating different territorial spaces from taking another territorial space as a reference.

Geographic coordinates in sexagesimal notation

On this occasion, I am going to comment on a specific case that happened to me this week, in which I had to create a layer with the location of the AEMET weather networks located in Andalusia.

Removing a somewhat strange format, according to the metadata sent the geographic coordinates, the location of each station was offered in a sexagesimal system, so editing work had to be carried out to be able to incorporate them into the Post GIS geographic base of the project.

The coordinates of the 1700-odd stations, as I mentioned, were in sexagesimal notation, or what is the same, represented in degrees, minutes and seconds . Parts of a degree less than a second are expressed as a decimal part of a second. To this system is added the initials N / S for latitude according to the hemisphere in which we are and E / W for longitude according to its location in relation to the Greenwich Meridian.

This representation format is not, however, the most used within GIS . It is more common to work with data in geographic coordinate systems (WGS84, ETRS89 …) but with decimal notation . In this case, latitudes 0 ° and 90 ° would correspond to the Northern Hemisphere and those between 0 ° and -90 ° to the Southern Hemisphere. For Longitude, the values between 0 ° and 180 ° are located to the East of the Greenwich meridian and the degrees between 0 ° and -180 ° are situations to the West of said meridian. Thus, the previous coordinates, in decimal system, would correspond to:

Working with geographic coordinates GGMMSS with QGIS 3

Having some basic but clear knowledge about Geodesy is one of the keys on which the professional use of Geographic Information Systems is based. They are somewhat complicated topics, especially for those people not related to careers such as geodetic engineering, surveying or geography, but on the other hand fundamental.

In the courses that I have been teaching, I usually add a small annex with simple explanations of concepts such as: ellipsoid, datum, projections, latitude, longitude…. I also recommend this dossier entitled “Concepts of Cartography” edited by the IGN or this one on Geodesy , this time somewhat more advanced.
The Tabula Rogeriana, drawn by Muhammad al-Idrisi for Roger II of Sicily in 1154.

Geographic coordinates in sexagesimal notation

On this occasion, I am going to comment on a specific case that happened to me this week, in which I had to create a layer with the location of the AEMET weather networks located in Andalusia.

Removing a somewhat strange format, according to the metadata sent the geographic coordinates, the location of each station was offered in a sexagesimal system, so editing work had to be carried out to be able to incorporate them into the Post GIS geographic base of the project.

The coordinates of the 1700-odd stations, as I mentioned, were in sexagesimal notation, or what is the same, represented in degrees, minutes and seconds . Parts of a degree less than a second are expressed as a decimal part of a second. To this system is added the initials N / S for latitude according to the hemisphere in which we are and E / W for longitude according to its location in relation to the Greenwich Meridian.

Degree Symbol in Maths – ° Degree Symbols

degree symbol

This article is about “grade” as it is used in the area of mathematics. For other meanings of this word, see grade .In mathematics there are different meanings of the word degree depending on the mathematical area in question. All definitions result in a natural number that expresses the degree .

Degree of a Polynomial

In algebra degree of a polynomial is the maximum degree of the exponents of the variables of the monomials that compose it. Each degree has basically the same meaning when it refers to a polynomial or an algebraic equation. Consequently, the first definition that may need to be revised is that of the monomial, considered by elementary algebra as a basic algebraic expression, which is made up of a combination of numbers and letters (raised to positive integer exponents, including zero) between which there are no subtraction, addition or division operations, being then the only ones allowed, the multiplication raised between the numeric element (coefficient) and the non-numeric element (literal or variable) as well as the potentiation that occurred between the literal and its exponent.

The degree of a polynomial of a variable is the maximum exponent that the monomial has on the variable; For example, in 2 x 3 + 4 x 2 + x + 7, the term with the highest degree is 2 x 3 ; this term has a power of three on the variable x, and is therefore defined as degree 3 or third degree .

For polynomials of two or more variables, the degree of a term is the sum of the exponents of the variables in the term; the degree of the polynomial will be the monomial of the highest degree. For example, the polynomial x 2 y 2 + 3 x 3 + 4 y has a degree of 4, the same degree as the term x 2 and 2 .

Degree Of Congruence

Yes {\ displaystyle \ textstyle f (x) = a_ {n} x ^ {n} + a_ {n-1} x ^ {n-1} + \ cdots + a_ {1} x ^ {1} + a_ {0 } x <0}{\ displaystyle \ textstyle f (x) = a_ {n} x ^ {n} + a_ {n-1} x ^ {n-1} + \ cdots + a_ {1} x ^ {1} + a_ {0 } x <0} is a polynomial with integer coefficients, the degree of congruence of {\ displaystyle \ textstyle f (x) \ equiv 0 {\ pmod {m}}}{\ displaystyle \ textstyle f (x) \ equiv 0 {\ pmod {m}}}is the largest positive integer j such that a j is not congruent with zero with respect to modulus m .

Equation Theory

In algebraic equation theory , the degree of an equation corresponds to the maximum power to which the algebraic unknown in the equation is raised. For example:{\ displaystyle x ^ {3} y + 4x-y = 2xy \, \!}{\ displaystyle x ^ {3} y + 4x-y = 2xy \, \!}the equation is of the third degree in x , being of the first degree in the unknown y . See: Equation of second degree , Equation of third degree , Equation of fourth degree , Equation of fifth degree , etc.

Degree of an extension

In algebra it has the extension body and the degree therein is defined as any vector space with basis you can calculate the dimension of{\ displaystyle L}L as vector space over {\ displaystyle K}K, denoted by {\ displaystyle \ dim _ {K} (L)}{\ displaystyle \ dim _ {K} (L)}. {\ displaystyle L: K}{\ displaystyle L: K} to the dimension of {\ displaystyle L}L What {\ displaystyle K}K-vectorial space: {\ displaystyle [L: K] = \ dim _ {K} (L)}{\ displaystyle [L: K] = \ dim _ {K} (L)}.

Graph theory

In Graph Theory , the degree or valence of a vertex is the number of edges incident to the vertex. The degree of a vertex x is denoted by degree (x) , g (x) or gr (x) (although δ (x) is also used , and from English d (x) and deg (x) ). The maximum degree of a graph G is denoted by Δ (G) and the minimum degree of a graph G is denoted by δ (G) .

Degree of freedom (statistics)

In statistics , degrees of freedom , an expression introduced by Ronald Fisher , says that, from a set of observations, the degrees of freedom are given by the number of values that can be arbitrarily assigned, before the rest of the variables take a value automatically, the product of establishing those that are free; this, in order to compensate and equalize a result which has been previously known. They are found by the formula{\ displaystyle nr}{\ displaystyle nr}, where n is the number of subjects in the sample that can take a value and r is the number of subjects whose value will depend on the number taken by the members of the sample who are free. They can also be represented by{\ displaystyle kr}{\ displaystyle kr}, where {\ displaystyle k}k= number of groups; this, when operations are carried out with groups and not with individual subjects.

When it comes to eliminating statistics with a set of data, the residuals – expressed in vector form – are found, usually in a space of less dimension than that in which the original data were found. The degrees of freedom of the error are determined precisely by the value of this smallest dimension.

This also means that the residuals are restricted to being in a space of dimension {\ displaystyle n-1}n-1 (in this example, in the general case a {\ displaystyle nr}{\ displaystyle nr}) since, if the value of {\ displaystyle n-1}n-1of these residues, the determination of the value of the remaining residue is immediate. Thus, it is said that «the error has{\ displaystyle n-1}n-1 degrees of freedom »(the error has {\ displaystyle nr}{\ displaystyle nr} general degrees of freedom).

 

 

 

° Degree Symbol Alt Code

Windows ALT Code List (ASCII Symbols) – The ALT codes also known as symbols keyboard , symbols ALT or correctly symbols ASCII (For its acronym in English: American Standard Code for Information Interchange ) is a coding pattern that is used in computing.

 

Taking as an example the common characters that are the letter eñe lowercase ñ or uppercase Ñ or vowels with accent, for example lowercase a with accent á, lowercase e with accent é, etc.
To type any of these with the keyboard in Windows we must perform the following steps:

Press the “ALT” [keybt] ALT [/ keybt] key on the keyboard without releasing.

Holding down the previous one we must write with the numeric keyboard the code corresponding to the ALT symbol to write for example: “165” [keybt] 1 [/ keybt] + [keybt] 6 [/ keybt] + [keybt] 5 [/ keybt] which is the code or number corresponding to the letter or symbol “Ñ” capital letter.
Release the “ALT” key [keybt] ALT [/ keybt] and the character should appear or be displayed.
Summary steps for typing an ALT symbol

Hold down the “ALT” key

Without releasing the previous one write the code; “ALT” + Codes.

Release “ALT” key

What is the ASCII code for the degree sign symbol?

The degree sign extended ASCII code displayed with the “°” symbol is 248.
For the representation of the degree sign in any computer text, it must be taken into account that it must use ASCII code or an extension that is compatible. If this is compatible, in any text editor, applying the keyboard combination ALT + 248 will return the “°” symbol.

Nowadays almost all computer systems (computers, mobile phones, tablets …) usually accept this code without problem and represent the symbols without problem, however, some may not interpret them making that when indicating the ASCII code 248 (American Standard Code for Information Exchange) an error symbol is displayed instead of the “°” symbol.
It should be remembered that many text editors allow searching in the different symbols in their options panel to facilitate the writing of the symbol «°» without having to know the extended ASCII code that corresponds to it, in this case by combining ALT + 248 .

How To Make Faces And Symbols Using ASCII Code

It hasn’t happened to you that you need to write a special character like ñ or @ and you don’t know how to write it or where to find it. This may be due to a bad configuration of the keyboard language in your operating system. Surfing the internet I found a solution, which is the one that I am going to show you next, we are going to see a little theory. It is about using the famous ASCII code to be able to obtain any symbol regardless of the language of the keyboard of the operating system in which we are working.

What Is ASCII Code ?

ASCII is the acronym for American Standard Code for Information Interchange in Spanish stands for American Standard Code for Information Interchange generally pronounced Aski . It is based on the Latin alphabet, as used in modern English. It was created in 1963 by the American Standards Committee (ASA),

How To Use?

To create these characters, hold down the “alt” key on your keyboard and type the numbers on the right side of the keyboard (numeric keypad) and then release the buttons and the symbol will appear. This is a great way to experiment with new symbols, signs, and characters. It’s also good if a button or letter on the keyboard stops working, because you can still type with the number pad. Just look down the list to find the one you need.

How to type the ° (degrees) symbol in Word 2016 and Word 2019

Perhaps the most utilized applications today for report the board in Microsoft Word  Thanks to this program, we have the possibility of creating text files with different options such as graphs or tables. In addition, sharing a Word document is something quite simple, since we can do it through the mail for example, being a compatible format on both Windows and Mac.

 

In spite of the fact that Word offers us many alternatives to deal with the data in the most ideal manner, in some cases we wind up confronted with the need to enter certain unique characters and we do not know how to do them or we must resort to the ASCII table to know which combination of keys we can use to get that symbol or character.

That is why today Solvetic will analyze the different practical ways of entering said text in our Word 2016 and Word 2019 documents.

If we are on computers with Windows operating systems we will press the Alt key and the numbers 0176 or 248, then we release the Alt key and the degree symbol will appear automatically.
Alt+ 0176 / 248

If we are on computers with macOS operating systems, it will be necessary to use the key combination Option + Shift + 8 to add this symbol.

The Symbols Of the Degrees Of Temperature

degree symbol for temperature

Typography

On account of levels of rakish bend, the degree image follows the number with no space in the middle, for instance 30 °. The addition of minutes and seconds of arc units follows the units of degree, with spaces between the units but no spaces between the numbers and arc symbols, for example, 30 ° 12 ′ 5 ″.

degree symbols in temperature

For temperature degrees, three engineering and scientific standards bodies (the International Bureau of Weights and Measures, the International Organization for Standardization, and the United States Government Printing Office) prescribe printing temperatures with a space between the number and the degree symbol, for example 10 ° C. However, in many works with professional typesetting, including scientific papers published by the University of Chicago Press or Oxford University Press, the degree symbol is printed without spaces between the number, the symbol and the Latin letters “C” or “F” representing Celsius or Fahrenheit, respectively, p. ex. 10 ° C. This is also the practice of the University Corporation for Atmospheric Research,

Although not recommended, the degree symbol without the next Latin letter is used without a space between the number and the symbol, for example, 10 °; this is considered more acceptable if the temperature standard is not known, but it is recommended in this case that the entire word (eg 10 degrees) be used instead of the symbol. The use of the degree symbol to refer to temperatures measured in degrees Kelvin (symbol: K) was abolished in 1967 by the 13th General Conference on Weights and Measures (CGPM). Therefore, the triple point of water, for example, is simply written as 273.16 K. The name of the SI unit of temperature is now “kelvin”, in lower case, and no longer “degrees Kelvin”.

TEMPERATURE

Physical quantity that indicates the ability of a body to transfer or absorb heat from the environment or from another body in contact with it. In practice, a body’s temperature measurement represents an indication of “how hot or cold” the body is. The instruments used to carry out temperature measurements are thermometers, based on different properties of certain substances (thermal expansion or thermoelectric effect) to give a value of said magnitude in relation to the conventionally established scale.

degree symbol in temperature

The most widely used unit of measure is the degree centigrade (symbol ° C), which corresponds to one hundredth of the temperature interval between the melting and boiling points of distilled water at 1 atm, which adopt conventional and respectively the values of 0 ° C and 100 ° C. This temperature scale is also called the Celsius scale. Another scale, used in Anglo-Saxon countries, is Fahrenheit (symbol ° P), according to which 0 and 100 of the Celsius scale correspond, respectively, to 32 and 212 ° P. The scale is obtained by matching the indication of 100 ° F to the temperature of the human body (36 ° C). The Réaumur scale (symbol ° R) has also been used, in which 0 and 100 ° C correspond respectively to 0 and 80 ° R.

In thermodynamics, temperature is usually measured in ° C, referring it, however, to the so-called absolute scale or Kelvin (symbol ° K). The temperature in degrees Kelvin corresponds to the temperature, in degrees Celsius, measured with respect to absolute zero (-273.16 ° C). Between the Celsius scale and the absolute scale there is thus the relationship r (° K) = É (° C) + 273.16.

Measuring the temperature

Now that you know the difference between heat and temperature and their relationship, we are going to know which are the most used scales to measure temperature.

When you have suspected a fever, you have most likely measured your temperature with a thermometer . Thermometers are used to measure temperature according to well-defined measurement scales.

The three most common temperature scales are: Celsius, Fahrenheit, and Kelvin. A temperature scale can be made by distinguishing two effectively reproducible temperatures. The boiling temperatures (change from liquid to vapor state) and melting (change from solid to liquid state) of water, at one atmosphere of pressure, are examples of parameters used.

Celsius and Fahrenheit

Although most countries use the Celsius or Centigrade scale, some use the Fahrenheit scale, so it is good to know them and know how their units can be converted, in order to understand each other.
The Celsius scale (\ degree C° Cdegree, C) takes into account the value 0 \ degree0 °0, degree for the melting point of water, while the boiling point of water corresponds to 100 \ degree1 0 0 °100 degree.

degree celsius

 

In the case of the Fahrenheit scale (\ degree F)° F )degree, F, right parenthesis, the most used in the United States for example, the melting point of water is at 32 \ degree3 2 °32, degreeFFF and boiling at 212 \ degree2 1 2 °212, degreeFFF.

 

It is very important to remember that the variation in temperature of one degree Celsius is greater than the variation in temperature of one degree Fahrenheit. Only100 \ degree1 0 0 °100 degree CCC cover the same range as 180 \ degree1 8 0 °180 degree FFF.

 

 

Degrees Celsius to Fahrenheit – Metric Conversion ºC to ºF

degrees celsius symbol

The degree Celsius (symbol: ° C) designates the temperature unit, named after the Swedish astronomer Anders Celsius (1701–1744), who was the first to propose it in 1742. The Celsius temperature scale was designed that the freezing point (freezing) of the water corresponds to zero, and the evaporation point corresponds to the value 100, observed at a standard atmospheric pressure.

degrees celsius

As there are 100 graduations between these two reference points, the original term for this system was either centigrade (100 parts) or hundredths. In 1948, the name of the system was officially changed to Celsius during the 9th General Conference on Weights and Measures (CR 64), both in recognition of Celsius and to eliminate the confusion caused by the conflict in the use of the SI centi prefixes. Therefore, it is not convenient to say “degree centigrade”, but rather, “degree Celsius”.

 

While the water freeze and evaporation values ​​are approximately correct, the original definition is not appropriate as a formal standard: it depends on the definition of standard atmospheric pressure, which in turn depends on the temperature definition itself. The current official definition of degree Celsius defines 0.01 ° C as the triple point of water, and 1 degree Celsius as being 1 / 273.16 of the temperature difference between the triple point of water and absolute zero. This definition guarantees that 1 degree Celsius has the same temperature variation as 1 kelvin.

Digital thermo hygrometer with a thermocouple inside Anders Celsius initially proposed that the freezing point be 100 degrees Celsius, and the evaporation point 0 degrees Celsius. This was reversed in 1747, at the instigation of Linnaeus, or perhaps Daniel Ekström, the builder of most of the thermometers used by Celsius.

The Fahrenheit scale

Due to the low temperatures in northern European countries, Gabriel Fahrenheit had developed a previous scale to be able to measure the extremely low temperatures in these regions.

Conversiondegrees celsius

 

The conversion method for Fahrenheit consists of multiplying the value in Celsius by 1.8 and adding 32 to the result.

Similarly, to convert degree Fahrenheit to degree Celsius, subtract 32 and divide the result by 1.8.

Present

The Celsius scale is used almost all over the world on a daily basis, although it was called centigrade until the late 1980s and early 1990s, mainly in weather forecasts on European radio and television networks such as the BBC, ITV, and RTÉ .

In the USA, Fahrenheit is the preferred scale for daily temperature measurements. It should be noted, however, that even these countries use Celsius or Kelvin in scientific applications.

Street thermometer. In newscasts and thermometers on major avenues in Brazil, they always refer to temperature on the Celsius scale, expressing it only with the degree symbol (°). Such a notation causes some confusion for North American visitors and is considered wrong by the SI (International System of Units), since the degree symbol after the numerical quantity without the letter C represents the angle symbol.

Scientific thermometers have mercury inside, and homemade ones usually contain alcohol (blue in color). The most modern and also precise are made by the union of two different metals, creating a thermocouple. Most modern thermometers and thermostats use a thermocouple.

Representation of the unit “degree Celsius”

Resolution Conmetro nº 12, of 10/12/1988, adopts the General Framework of Measurement Units and instructs INMETRO to propose the modifications that become necessary to this Framework, in order to resolve omitted cases, keep it updated and resolve doubts that may arise in the interpretation and application of legal units.

– Sub-item 3.5 of Annex A of this Resolution Conmetro deals with the spacing between number and symbol, and establishes that the spacing between number and symbol of the corresponding unit must meet the convenience of each case, for example:

a) In sentences of current texts, the space corresponding to one or half letter is normally given, but spacing should not be given when there is a possibility of fraud;

b) In table columns, it is possible to use different spacing between numbers and the symbols of the corresponding units.

– Conmetro Resolution 12/1988 is based on the parameters recommended by the International Bureau of Weights and Measures (BIPM), which regularly publishes a publication on the units of the International System of Units – SI.

– Subitem 5.3.3 of the 8th edition (2006) of the BIPM publication establishes conditions for writing the value of a quantity in the following terms:

a) The unit symbol must always be placed after the numerical value of the expression for a quantity, leaving a space between the numeric value and the unit symbol.

b) The only exceptions to the rule are the unit symbols for the degree, minute and second of the plane angle, °; ´; and ”, respectively, for which there is no space between the numeric value and the unit symbol.

c) It should be noted that, according to this rule, the symbol “° C” for the degree Celsius must be preceded by a space when expressing a temperature on the Celsius scale, as shown below:

Representation of the “Celsius grade” unit on computers

In Unicode, the degree symbol is U + 00B0 (°), while the respective HTML code is °and the Alt + code is Alt + 0167.

Due to the similar appearance of this symbol with other symbols on the computer screen or in certain prints, such as the male ordinal indicator (º), there may be problems when searching for texts with these symbols. Therefore, for keyboards that do not differ between the degree and ordinal symbols, use:

degree Celsius: ALT + 0167 followed by the letter C.
male ordinal indicator: ALT + 167.

Temperature conversion table in degrees Celsius and Fahrenheit

Conversion Factors

Celsius into / for Fahrenheit: ( the C x 9) / 5) + 32

Fahrenheit into / for Celsius: ( the F – 32) x 5) / 9

c ºF
1 33.8
2 35.6
3 37.4
4 39.2
5 41.0
6 42.8
7 44.6
8 46.4
9 48.2
10 50.0
11 51.8
12 53.6
13 55.4
14 57.2
15 59.0
16 60.8
17 62.6
18 64.4
19 66.2
20 68.0
21 69.8
22 71.6
23 73.4
24 75.2
25 77.0
26 78.8
27 80.6
28 82.4
29 84.2
30 86.0
31 87.8
32 89.6
33 91.4
34 93.2
35 95.0
36 96.8
37 98.6
38 100.4
39 102.2
40 104.0
41 105.8
42 107.6
43 119.4
44 111.2
45 113.0
46 114.8
47 116.6
48 118.4
49 120.2
50 122.0
51 123.8
52 125.6
53 127.4
54 129.2
55 131.0
56 132.8
57 134.6
58 136.4
59 138.2
60 140.0
61 141.8
62 143.6
63 145.4
64 147.2
65 149.0
66 150.8
67 152.6
68 154.4
69 156.2
70 158.0
71 159.8
72 161.6
73 163.4
74 165.2
75 167.0
76 168.8
77 170.6
78 172.4
79 174.2
80 176.0
81 177.8
82 179.6
83 181.4
84 183.2
85 185.0
86 186.8
87 188.6
88 190.4
89 192.2
90 194.0
91 195.8
92 197.6
93 199.4
94 201.2
95 203.0
96 204.8
97 206.6
98 208.4
99 210.2
100 212.0

How to add a step symbol to Microsoft Power Point

degree symbol

You will not find ° (degree symbol) on your keyboard. Insert a step symbol into Microsoft PowerPoint in two ways, both of which are detailed below.

degree symbol

Insert a step symbol using the PowerPoint ribbon

 

  1. Select the text box on the slider where you want to place the step symbol.
  2. On the ” Insert ” tab select “Symbol”  In some versions of PowerPoint, this option appears on the right hand side of the menu.
  3. In the window that opens, make sure the “Font:” (plain text) menu is selected ,  which in another menu – ” Superscripts and Subscripts” .
  4. At the bottom of this window, next to “from” select, ASCII (decimal) .
  5. Scroll until you get a step signal.
  6. Click on the ” Insert” below.
  7. Click ” Close”, close the ” Symbol ” and return to the PowerPoint document.

PowerPoint will probably not prompt you to confirm that you have completed Step 6.. After the ” Insert” if you want to make sure the degree mark has actually been inserted, move the dialog to the side or close it to check.

 

Enter a step symbol using a keyboard shortcut

Keyboard shortcuts are more powerful, especially when entering characters like this one, where you would have to scroll through a list of dozens of other characters to find the right one.

In fact, this method does not work no matter where you are, including in email, web browser, etc.

Use your standard keyboard to enter a step symbol

  1. Choose exactly where you want the step sign to go.
  2. Use the power character hotkey to enter a character: Alt + 0176 .
    That is, hold down the Alt key , and then use the keyboard enter 0176  After entering numbers, you can release the Alt key to see the [°] step symbol.
    If this step does not work, make sure that the keyboard does not work the keyboard is not locked (i.e enable num locking). If enabled, the keyboard will not accept numeric values. You cannot insert a degree symbol using the top row of numbers.

degree symbol

Without numeric pad

Each Fn laptop keyboard has a function key It is used to access additional features that are not normally available due to the smaller number of keys on a standard laptop keyboard.

If you do not have a keyboard on your keyboard, but have function keys, try this:

  1. Hold the Alt and Fn keys together.
  2. Find the keys corresponding to the function keys (same colors as the Fn keys).
  3. As above, press the keys showing 0176, then release the Alt and Fn keys to enter the step symbol.

Degree Symbol: How to Put a Degree Icon on a Keyboard

Degree Symbol: How to Put a Degree Icon on a Keyboard: Sometimes when working with a text document in MS Word, it is necessary to add a character that is not on the keyboard. Not all users of this great program are aware of the large number of special characters and characters it contains. We’ve already written about adding some characters to a text document, and in this article we’ll talk about how to put degrees Celsius in Word.

degree symbol on keyboard

As you probably know, degrees Celsius show a small circle at the top of the line and a large Latin letter C. You can place a Latin letter in English by holding down the “Shift” key. But you need to take a few simple steps to make the necessary circle.

Tip: To change the language, use the keyboard shortcut “Ctrl + Shift” or “Alt + Shift” (the key combination depends on your system settings).

1. Click where you want to put the “degree” symbol in the document (after the last number after the space, just before the letter “C” ).

2. Open the “Enter” tab where in the “Symbols” group press the “Symbol” button .

3. In the window that appears, find and click on the “degree” symbol.

Tip: If the list is displayed after clicking the “Symbol” button , there is no “Degree” character , select “Other symbols” and find it in the “Phonetic characters” set and press the “Paste” button .

4. A degree is added to the location you specified.

Despite the fact that this special character in Microsoft Word is a degree sign, it seems unpleasant to say the least, and it’s not as high for the line as we’d like. To fix this, follow these steps:

1. Highlight the added degree mark.

2. On the “Home” tab , in the “Font  group , click the “Superscript” button ( X2 ).

Tip: You can also enable the writing mode “Superscript” by pressing ” Ctrl + Shift + (plus)” at the same time.

3. The special character is raised, now your Celsius numbers will be correct.

Add a degree using the keys

Each special character in a Microsoft suite has its own code, knowing that you can take action much faster.

To enter a degree icon using the Word keys, follow these steps:

1. Place the cursor where the degree mark should appear.

2. Enter “1D52” without quotation marks (letter D – English capitalization ).

3. Press “Alt + X” without moving the cursor from that point .

4. Highlight the added Celsius sign and press the “Superscript” button in the “Font” group .

5. The special sign “degree” gets the right shape.

That’s all, now you know how to spell degrees Celsius correctly in Word, or rather add a special character to denote them. We wish you success in acquiring the many features and useful functions of the most popular text editor.

There is no typographic symbol for the dimensions of quantities measured in degrees on the computer keyboard, which raises a logical question among users: how to put it? Most people find a way out by copying the superscript around from another source and then pasting it into their document. However, there are several easy ways to create a degree symbol with your own hands.

Print a degree symbol

degrees symbols

Windows

Each operating system provides certain key combinations (called keyboard shortcuts ) to perform an action quickly . For example, by pressing Ctrl + A at the same time in Windows, you can select the entire text document, you can use Ctrl + C to copy the selected snippet, and Ctrl + V to paste. ° The icon can also be entered using keyboard shortcuts. In Windows, this is done as follows:

  1. Open a document in Microsoft Word, Notebook, or any other program that allows you to enter text (even your browser’s address bar does).
  2. Turn on the numeric keypad on the right by pressing the NumLock key.
  3. Hold left Alt and enter 0176 or 248 on the numeric keypad. When you release the Alt key, a degree symbol appears above the cursor. If the code doesn’t work, try pressing Alt instead of Left.

In Microsoft Office programs (except Microsoft Excel), you can use another method:

  1. Hold down Ctrl + Shift + 2.
  2. Press Spacebar … When done correctly, a superscript circle will be added to the edited document.

In addition, Microsoft Word can work with hexadecimal Unicode tables by converting them to the corresponding characters. The degree icon corresponds to the code 00B0 – it should be written in the text where there should be a superscript circle, and then press Alt + X. Word removes the hexadecimal code from the text, replacing it with °.

Mac OS-is

To print the degree icon for Mac OS , use the Opt + Shift + 8 key combination. You can also use the following method:

  1. Open the menu and go to system settings. This action activates the symbol viewer.
  2. Enter the settings by clicking the button with the corresponding name. In the settings, select the “Show keyboard viewers, emoticons, and symbols” checkbox.
  3. In the upper right corner , a button titled “View” will appear. Click on it and select “Show emoticons and symbols”.
  4. Go to the “Punctuation” menu and double-click the degree icon. It is displayed at the cursor position.

If the degree sign is used quite often, it makes sense to add it to the list of favorite symbols. When you do this, an icon will appear at the top of the window among the quick access items.

Degree icon on mobile devices

Phones and tablets are ° easier to type than computers because they have a symbolic keyboard that displays icons.

The checked android degree symbol for widgets is written as follows:

  1. Open any application that allows you to use the on-screen keyboard.
  2. Click the character key on your keyboard (usually in the lower-left corner).
  3. Typically , the ° symbol is located on the second page of the symbol keyboard. The method for switching to this depends on the keyboard itself, but the toggle button is usually indicated by the “\ u003e” or “? 123” icons.
  4. Press the key with the superscript circle. To put a degree on the iPhone and iPad , you need to do the following.
    1. Open an application that allows you to use the keyboard.
    2. Go to the symbol keyboard by pressing the corresponding button.
    3. Hold 0 – A menu with a degree sign appears in front of you.
    4. Swipe and remove your finger from the screen. After that, a superscript circle is placed in the text.

Other ways to print a degree

In Windows, you can add a degree icon to an edited document using a symbol table. Hold down the Win + R combination on your keyboard and enter char map in the window that opens, then press Enter. A table of symbols opens in front of you. Find the degree mark in it, double-click it, and click “Copy.” Go back to the document you’re working on and paste the icon where you want it in the text, using the keyboard shortcut Ctrl + V.

You can also open the symbol table with the Start button. Click Start and type “Character Map” in the search bar. The program appears in the search results.

If you want to place the ° symbol in the text of your website, place the ° or ° symbols in the hypertext document – both the first and second form the required character.

Degrees Celsius using tape

It is important to point the cursor where the degree icon is needed. Then go to the “Add” tab, click the “Symbol” button and go to the “Other Symbols” section. A window will open with different variations of icons and letters.

Now it is important to set “Font” and “Set”. On the “Font” tab, select “Times New Roman” and on the “Set” tab, find “Additional Latin-1.” If configured correctly, a new name layout with a degree icon will appear in the window. Select the temperature symbol and click the “Add” button. Everything succeeded!

How to write t with a combination of degree buttons?

Anyone can manipulate the keys like this, you just have to remember the character code. We enter the text and stop at the place where it is necessary to mark t with a degree sign. Next, find and hold the Alt key on your keyboard, and now the main thing is to remember the symbol code and enter it. Recall when someone forgot – 0176.

Note. You must enter the numbers on the additional numeric keypad shown in the screenshot below.

The image below shows how to find the “Celsius” symbol code to print a temperature sign easily and quickly in the future. First, place the cursor in the right place, enter the icon code, and hold down Alt + x (x for the English keyboard layout), and you’re done.

And when you first use the icon, it appears in a pop-up window for quick finding and entering.

Can a degree be written with a letter or a number?

The “Home” section of Word’s main layout has a superscript icon that you can use to insert a temperature sign above the text reference line. Let’s look at the picture and repeat. Place the cursor in the correct place, open the “Home” tab, scroll to “Superscript” and press (lights up yellow) and then type either the letter “o” or the number “0”. Who likes it more!

It is not uncommon for you to use a non-standard character or a character that is not on the keyboard when working with text documents. For example, the degree sign is used very often, but it is not on the keyboard. In this article, we’ll talk about how to place a degree mark on the keyboard, but also without it.

Method number 1. The key combination Alt + 248.

If you need to enter a degree using the keyboard, perhaps the fastest and easiest way is the Alt + 248 key combination. To use this key combination, place the cursor over the text where the degree sign should be. After that, hold down the Alt key on your keyboard and, without releasing the Alt key, enter the number 248 in the auxiliary key block (on the right side of the keyboard, under Num Lock).

As a result, a degree mark appears at the cursor position. This key combination works in any program.

Method number 2. The key combination Alt + 0176.

There is also a keyboard shortcut Alt + 0176. It works the same as the previous method. You must place the cursor where you want to place the degree mark, hold down the Alt key, and type 0176 on the additional keyboard without releasing it.

After that, a degree mark appears at the selected location. This key combination, like the previous one, works in every program.

How to Put a Degree Without a Keyboard |

If you do not remember the key combinations described above, entering a degree without using the keyboard may be more convenient. This can be done using the “Symbol Map” program, which is available in any version of Windows.

To do this, you must first open the “Symbol Table” program. For example, you can press Windows-R and execute the command “charmap.exe” in the window that appears.

You can also open the symbol table from the Start menu.
In the “Symbol table” you need to find the degree, select it with the mouse and click “Select”.
After that, you need to click the “Copy” button and paste the degree mark where you want it in the document, using the CTRL-V key combination or the “Paste” command.

So you can put a degree in any document and any program.

(:) comma (,) dash ( -, -, -, – ) ellipse (…, …,…) exclamation mark (!) dot (.) hyphen ( – ) hyphen minus (-) question mark (?) quote ( „“, «», “”, ”, ‹› ) semicolon (;) Separators space () () ()On Windows computers, you can enter a degree by pressing Alt and typing on the numeric keypad 0 1 7 6. On Linux computers, you can enter a degree by typing Compose oo or ⇧ Shift + Ctrl + U and typing 0 1 7 6 after u … On Mac computers, you can enter a degree by pressing alt + 0.

According to the rules of the typographic set, the degree mark is placed immediately after the numerical representation of the angle or temperature dimension without a space, but if the scale is indicated for temperature (Celsius, Fahrenheit, etc.), the degree mark is beaten with a non-breaking space degree mark. P:

The temperature in the first chamber of the chamber should be kept at +26 ° C and in the second 2 ° cooler.

At the time shown, the missile was above South America, at 7 ° 33 ′ S, incl. and 40 ° W. etc.

Unicode supports Kelvin characters (212A) and combined Celsius characters (2103) and Fahrenheit characters (2109) that are outside of Chinese fonts (full-width format) to ensure compatibility with Chinese CJK encodings where such characters occur. Is not being used.

It should be noted that the unit of temperature on the Kelvin scale is not called ” degree Kelvin “, but simply ” kelvin “.

An excerpt that characterizes the degree sign

They then describe to us the size of the souls of the marshals, especially Ney, the size of the soul, which is that at night he made his way through the forest across the Dnieper and ran to Orsha without flags and cannons and without nine-tenths of his army.

degree symbols
And finally, historians present to us the great departure of the great emperor from the heroic army as something great and glorious. Even this last act of flight, in human language, called the last degree of humility that every child learns to be ashamed of, and what is said in the language of historians is justified.
When such elastic threads of historical reasoning can no longer be stretched, when action is already clearly at odds with what all mankind calls good and even justice, historians have a welcome concept of size. Greatness seems to rule out the possibility of good and bad measurement. There is no harm in the big ones. There is no terror that can be blamed on the big ones.
– “C” is grand! “[It’s majestic!] – historians say, and then there is no good or bad, but there are ‘big’ and ‘not big’. Grand is good, not big is bad. Grand is by these characteristics a property, some special animals, whom they call heroes. ”And Napoleon, coming home with a warm coat not only by the dying comrades, but (in his opinion) by the people he brought here, feels que c”
“Du sublime (he sees something sublime) honor to ridicule il n ‘ya qu’ un pas,” he says. And the whole world has been repeating for fifty years: “Exalted! Great! Napoleon is grand! Du sublime honor ridicule il n “ya qu” un pas “. [Majestic … Only one step from majestic to ridiculous … Majestic! Excellent! Napoleon great! Only a step from majestic to ridiculous.]
And no one should ever remember that kindness and recognizing immeasurable greatness by bad dimensions is only recognizing one’s insignificance and immeasurable smallness. For
us, the standard of good and evil given by Christ is immeasurable, and there is no magnitude without simplicity, goodness, and truth.

Who among the Russian people, reading the descriptions of the last period of the 1812 campaign, did not experience strong resentment, dissatisfaction and uncertainty. Who did not ask themselves: how did they not take, did not destroy all the French, when all three armies surrounded them more than when the irritated, hungry and frozen French surrendered as squads, and when (as history says) the Russians aimed to stop, interrupt and capture everything the French.

Import Degree Token on macOS: Why?

degree symbol macos

Insert Degree Token on macOS: Recently a reader asked about how to use the degree token in macOS (OS X). Writing a degree indicator on your Mac in macOS is as easy as it is on your phone using iOS. It allows you in the right way to show both math and increases unexpected weather conditions.

Again, there are two ways to type digital signal in macOS. They are both system-component functions, as they work seamlessly in any script on your Mac at any time

Note: They work at home with other remnants of secure messaging fields.

But don’t worry, all the applications you need to write a type degree are supported. Including Web browsers, COS Messages, Skype, Mail clients, and even advertising applications like Day One.

THE MOST IMPORTANT PART IS FROM YOUR MOST IMPORTANT PEOPLE

You can also set the degree mark (among other symbols) by using the Special Character menu. As it has been called the Emoji & Symbols menu in some recent versions of MacOS , including macOS Mojave.

degree symbols

DEGREE SYMBOL KEYBOARD SHORTCUT

The Special Character menu described above gives you hundreds of useful symbols, colors, and emoji from your choice. Again, if you just want the clear degree signal, it is not your quick choice. Instead, let’s take a shortcut.

While typing, place your hand on the position where you want to place the degree mark. Then use one of the following keyboard shortcuts:

We are not sure if there is any significant difference between large and small digital signals. But if it is used in mathematical and climatic conditions, applying it will likely make your mind over. Again, using the Special Character menu method described in the section above, the larger degree signal is obtained

Here is all about setting the degree indicator on macOS. For more questions and inquiries let us know in the comments section below. Again, drop a sentence if you want to share anything.

 

Installing a Degree Symbol on macOS: How?

Installing a Degree Symbol on macOS: A reader was recently asked how to use the graduation symbol in macOS (OS X). Typing a step symbol on your Mac in MacOS is as easy as it is on your phone using iOS. It allows you to properly articulate the mathematics and unpredictable weather.

Also, there are two ways to type a step symbol in macOS. Both are system-level functions, so they will work flawlessly in any application on your Mac at almost any time

Note: Works well with some exceptions for secure text entry fields.

But don’t worry, all the apps in which you want to type a degree symbol are supported. Including Web browsers, macOS Messaging, Skype, Mail clients, and even journalism apps like the popular Day One.

SYMBOL DEGREE FROM THE MENU SPECIAL CHARACTERISTICS

You can enter a degree symbol (among other symbols) by using the Special Characters menu. Now called the emoji & Symbols menu in several recent versions of macOS, including macOS Mojave.

To access it, go to your cursor where you want to insert the step symbol and then go to Edit> Special Characters  (or  Edit> Emoji & Symbols ) in the Menu Bar. Also, you can use the keyboard shortcut Control-Command-Space  on your Mac’s keyboard.

A new window will appear displaying a huge range of special characters ie symbols, and, for Yosemite, Emoji. Instead of manually browsing the available symbols, simply enter “rank” in the search box to display the available rank symbols.

As noted in the picture below you have a choice of three-step symbol options. One each for degrees Fahrenheit and Celsius, also a symbol of ordinary degree. Simply double-click on your symbol to insert it at the current location of your mouse cursor or trackpad. Sometimes used symbols and characters will appear under the search box, saving you a little time in the future.

stage-symbol-osx-special characters

DEGREE SYMBOL KEYBOARD SHORTCUT

The Special Characters menu explained above gives you hundreds of useful symbols, characters and emoji to choose from. Also, if you only want a normal rank symbol, that is not your immediate choice. Instead, let’s use a keyboard shortcut.

As you type, move your cursor to where you want to input a degree symbol. Then use one of the following keyboard shortcuts:

Transfer-Option-8:  This key combination inserts the correct step symbol (ie, 72 °)
Option-K: Use this key to insert a small step symbol that looks very similar to the actual step symbol but is less (ie, 72˚)

We are not sure if there is any significant difference between the major and minor degree symbols. But when used in mathematical and meteorological contexts, either of them will probably make your point. Also, by using the Special Characters menu approach explained in the section above, the larger stage symbol is inserted.

Conclusion:

Here is all the information about the step symbol apply on macOS. For more questions and queries let us know in the comments section below. Also, leave a comment if you want to share anything else.

Celsius degree symbol – Degrees centigrade icon on the keyboard

Degree Symbol

When writing scientific or highly specialized texts, special values ​​are needed, as well as other non-standard signs. It can be scientific articles, courses or other data where you need to know how to put a mark in Word or a similar symbol.

How to insert special characters in Word – in our new article

Many beginners, when trying to establish non-standard designations, are looking for them on the Internet to copy. This method is quite time consuming, as you must perform a similar procedure for each character. Also, not everyone knows the brand name like diameter.

Degree Symbol

Easier Method

There are several common methods that are suitable for a comprehensive solution for all designations, and each one individually. To work with special characters, the Windows operating system provides a special table that allows you to place these indicators directly in the document. In this way, you can insert a paragraph, diameter, degrees, tick and others.

It’s on the “Insert” toolbar. You need to click on the “Symbols” icon and then select the additional “Other” menu. Before the user opens a window with a large set of all possible values. They can be selected and inserted at the established position in the document. For your convenience, there are selection criteria, such as “Mathematics”, “Latin” and “Logic”, to facilitate the search for the required brand.

Use the “Insert” panel and find the “Character” command there.

The arrow can be entered in the same way. It comes in various versions in the stock panel. If a non-standard or elongated view is required, the “Insert” parameter provides a “Shapes” window, from where the arrow can be taken to work in any length and various graphic versions.

Hot keys

This method is best suited for those who should have regular access to symbols, such as diameter or paragraph. It does not require the installation of additional programs, you only need to press a combination of keys. You must first hold down the Alt button on the keyboard and then dial a number combination on the primary or secondary keyboard.

To set the diameter, you need to enter the numbers 0216. When the user presses Alt, the entered data will change to the desired value. This sign is useful when creating drawings, documents for layout, as well as promotional products. The diameter is in the shape of a crossed out letter “o”.

The paragraph is made in the form of two letters “s”. Previously, it was a required attribute on typewriters, but today the paragraph is used in automatic mode or with special insertion. Using a similar method with the Alt button pressed, you should enter 0167. The combination will become a paragraph. In the same way, you can insert degrees Celsius, which is placed in the combination 0186 or 0176.

Other forms

Degree can also be put into hexadecimal code. To do this, instead of the required character, you must dial 00BA. This special designation changes to a sign after pressing the Alt + X combination. There is a “superscript” icon on the main page. After pressing the cursor, it will move to the upper position of the entered value. Just press the letter “o” or the number “0” to accept the value of the degree.

In this way, special characters such as diameter, paragraph, and others are inserted when writing text files. The choice of method depends on personal preference and convenience. Over time, this happens automatically, so it only takes a little practice with either method.

– Percentage of percent sign Punctuation apostropher

– sign Division sign Punctuation apostrophe (‘)

– × multiplication sign (×) the mathematical sign of the multiplication operation. The multiplication sign is represented as a cross (×), period

– √ The sign of the root (the sign of the radical) in mathematics, the symbol of the roots, the default square. In the general case (for roots of degree n), the exponent is placed on the “bird”: the sign is used for cube roots, for roots of fourth degree …

– %% sign, more often indicating percentages. The origin of the designation

This term has other meanings, see Plus minus (meanings). ± ∓ The plus minus sign (±) is a mathematical symbol that is placed in front of a certain expression and means that the value of this expression can be both positive

Not to be confused with ʃ. ∫ The integral sign is used to denote an integral in mathematics. It was first used by the German mathematician and founder of the differential and integral calculus Leibniz in the late 17th century. Symbol (∫)

Tilde (Spanish tilde, from lat. Inscription Titulus) is the name of several typographic marks in the form of a wavy line. Contents 1 Diacritical mark 1.1 Superscript

– ¯ Macron (from Greek. Μακρόν) accent mark, represented as a bar above the symbol. In Unicode, a macron in the form of combined diacritics has the code U + 0304, and in the form of an independent character U + 00AF Use as a diacritic

The books

  • The treasure of the signs of the zodiac, or the veil of Isis, Omelchenko Yu. The book is written in the style of the “hero’s journey”, with a constant emphasis on esoteric values, easily defined by Astrology and esoteric Kabbalah, and ideally serves as a universal goal …

It is not uncommon when working with text documents, it is necessary to put some type of non-standard character or that is not on the keyboard. For example, the degree sign is used very often, but it is not on the keyboard. In this article, we will talk about how to place a degree sign with and without using the keyboard.

Method number 1. Alt + 248 key combination.

If you need to put a degree sign with the keyboard, perhaps the fastest and easiest way is to use the key combination Alt + 248. To use this key combination, place the cursor at the place in the text where there should be a degree sign . After that, hold down the Alt key on the keyboard and without releasing the Alt key, type the number 248 in the additional key block (on the right side of the keyboard, under Num Lock).

As a result, where the cursor was placed, a degree sign will appear. This key combination works in any program.

Method number 2. Alt + 0176 key combination.

There is also an Alt + 0176 key combination. It works the same way as in the previous method. You need to put the cursor where you need to put a degree sign, hold down the Alt key and don’t release, type 0176 on the additional keyboard.

celsius degree

 

After that, a degree sign will appear at the selected location. This key combination, like the previous one, works in any program.

How to put a degree sign without keyboard

If you cannot remember the key combinations described above, it may be more convenient for you to insert the degree sign without using the keyboard. This can be done with the help of the “Symbol Table” program, which is available in any version of Windows.

To do this, you first need to open the “Symbol Table” program. For example, you can click Windows-R and in the window that appears run the command “charmap.exe”.

In the “Character table” you need to find the degree sign, select it with the mouse and click the “Select” button.

After that, you need to click the “Copy” button and paste the degree sign in the correct place in the document using the CTRL-V key combination or the Paste command.

Therefore, you can put a degree sign in any document and any program.

The degree symbol will be extremely necessary when entering measurements, such as temperature values. Alt + 0176 key combination or drop down menu will help to set degree in Word.

Celsius degrees using the ribbon menu

It is important to indicate with the cursor where the degree icon is needed. Then go to the “Insert” tab, click on “Symbol” and go to “Other symbols”. A window will open with different variations of icons and letters.

Now it is important to specify the “Source” and the “Set”. On the “Font” tab, select “Times New Roman”, and on the “Set” tab, find “Additional Latin 1”. When properly configured, a new symbol design will appear in the window, including the degree icon. Select the temperature symbol and click the “Insert” button. Everything worked out!

How to write t with button degree combination?

To perform such manipulation with the keys under everyone’s power, you just need to remember the signal code. We write the text and stop at the place where it is necessary to indicate t with the degree sign. Next, we find the Alt button on the keyboard and press it, and now the main thing to remember is the character code and we type it. We remind you if someone forgot – 0176.

degree symbol

Note: you must dial the numbers on the additional numeric keypad shown in the following screenshot.

The image below shows how to find the character code “Celsius” to easily and quickly print the temperature signal in the future. First, put your cursor in the right place, type in the code for the icon, and hold down the Alt + x key combination (x – on the English keyboard layout) and you’re done.

And also when you use the icon for the first time, then it appears in the popup window to find and insert it quickly.

Is it possible to write a degree in letters or numbers?

The main Word layout in the “Home” section is a superscript icon, with which you can write a temperature sign above the reference line of all text. We look at the image and repeat it. Place the pointer in the right place, open the “Start” tab, find the “Superscript character” and press (light yellow), and then type the letter “O” or the number “0”. Who likes it more!

A typographic symbol in the form of a superscript circle, generally denoted as the dimension of angles and temperatures measured in degrees   , absent from the computer keyboard. However, it is in the encoding tables that the operating system uses to summarize the characters on the computer screen. He is among the first 128. marks   this table that allows him to use it even in the documents of the most primitive text formats, eg txt.

Instruction

1.   Use code 0176 to insert the degree icon in text documents. To do this, press the alt key and, without releasing it, type this code on the numeric keypad (optional). As you enter the code, nothing will change on the screen, and when you finish and release the alt key, the ° icon will appear at the location indicated by the input cursor.

2.   Start the Windows Character Map component, as an alternative to the insertion method for this symbol described above. You can do this, for example, by pressing the win + r key combination, typing the charmap command, and clicking the Enter key. In the symbol table of the window that opens, find the degree icon, double-click it, and click the “Copy” button. After that, switch to the edited document window and paste the copied symbol (ctrl + v).

3.   Use the key combination opt + shift + 8 if the operating system you are using belongs to the Mac OS family. It is this hotkey combination that you are assigned to insert a grade icon into documents.

4.   Paste hexadecimal code 00B0 (B – English letter), if you are working with documents in a Microsoft Office Word word processor. This code corresponds to the degree designation in the Unicode table, and Word can work with such symbol designations. After placing the input cursor at the place in the text where the degree sign should be, type this code and then press the alt + x key combination and the word processor will remove all four characters from the text, placing a single ° symbol .

5.   Use html character primitives if the degree sign must be placed in a hypertext document. To display this sign in the text of a web page, it is allowed to place a sequence of ° or ° characters: they both form the same ° icon.

Note!
To type the ° symbol on the keyboard, you need to hold down the ALT key, and on the auxiliary keyboard, type 0176 and release the ALT key after that. To print other characters, such as © ®, etc. I need to know the key code. This is the keycode, now activate Num Lock and press ALT and then on the auxiliary keyboard, type 0163 and release ALT. It is finally allowed to invariably call up a character table and copy characters from there, but this is neither fun nor sporty.

Good advice
How to enter missing characters on the keyboard? Let’s assume a trivial situation: you need to enter a special character in some text, but there is no key on the keyboard with such a character. How to be If you are working in a Word text editor, then there are no drawbacks: choose the Insert menu – \ u003e Symbol Yes, thanks, I already stumbled … I really didn’t find out right away. While I am writing the text in Notepad, it is not very comfortable to go up there all the time, for my taste, let’s say, exposing the elements of the list, degrees, mathematical signs